- Custom Solutions
- Aspire Audio
- Audio Engine
- Ben Burton Pty Ltd
- Bang & Olufsen
- Bowers & Wilkins
- Chord Electronics
- cocktail Audio
- C SEED
- Garrott Brothers
- Hana Cartridges
- JBL Synthesis
- JL Audio
- MadVR Labs
- Magnum Dynalab
- Meze Audio
- Mobile Fidelity Sound Lab
- Musical Fidelity
- Pantheone Audio
- PS Audio
- Revival Audio
- Roon Labs
- Row One
- Ruark Audio
- Serhan Swift
- Sonus faber
- Tivoli Audio
- View all
- Latest News
- Contact us
The Stellar Power Plant 3 stands on the shoulders of giants. Built as an evolution from our renowned P12, P15, and P20 the P3 is the perfect affordable solution for powering sources and small to medium systems.
Local pickup or $11 flat rate shipping within Australia
The Stellar™ Power Plant™ 3 is PS Audio’s most compact high-end personal power generating station: an all new class of affordable Power Plant AC regenerator that takes ordinary wall voltage and rebuilds it into perfect AC.
The Stellar 3 features an ultra-low impedance analog AC power amplifier, pure DSD FPGA based analog sine wave generator, and low distortion high-dynamic-peak-capable outputs found only in PS Audio Power Plants. The Stellar 3 is capable of fully powering most small to medium sized systems bringing forth all that’s possible from your HiFi system, ensuring you get the same great performance every time you listen.
The P3 delivers 300 watts of pure continuous regenerated power, 500 watts of short term power (up to 30 seconds), and dynamic peak power (3 second or less) of a whopping 900 watts for explosive dynamics. From small to medium power amplifiers to all your source equipment, the Stellar Power Plant 3 will work magic on your system’s performance with pure, regenerated power. The Stellar 3 also includes a separate zone with up to 1000 watts of filtered and protected power for larger power amplifiers.
With your system powered directly from the output of the Stellar 3, dynamics and openness are breathtaking. New voices, new harmonics and a renewed sense of musicality are yours the moment the Stellar 3 starts up. This is one of the most important pieces of audio equipment you can own, building a firm and reliable foundation for your system that will serve you for years to come.
The remote control
Touch the buttons on the Stellar 3 remote control and you can turn the power on and off, activate MultiWave or CleanWave.
One of the major advantages of generating new power from old is the ability to also generate new waveforms that enhance the capabilities of the power feeding your equipment.
MultiWave extends the peak charging time of the sine wave so connected equipment has more energy storage and less power supply ripple. Turning MultiWave on is like adding a larger capacitor bank to your connected equipment’s power supply. The audible results are dramatic and produce a bigger soundstage that sounds far more natural than with a simple sine wave.
CleanWave is another feature of the Stellar Power Plant 3 and helps connected equipment demagnetize their transformers. AC power is never quite symmetrical and the small asymmetry that occurs can magnetize connected power transformers.
Activating CleanWave from the Power Plant 3 remote control can remove this problem from connected transformers resulting in far cleaner audio.
50 times lower output impedance
Low output impedance is critical to maintaining a dynamic and robust presentation. Dynamic sags in the power line occur whenever your power-hungry equipment demands power to drive your loudspeakers or projector, causing noticeable degradation in the performance. Placing anything in the path of the power, like a passive power conditioner, only worsens the problem.
The Stellar 3, on the other hand, regulates the power and provides a constant output regardless of the dynamic demands of power-hungry equipment or your neighbors. When your power amp is asked to produce loud orchestral levels, you want to make sure it has all the power it needs. The Stellar Power Plant 3 has such low output impedance (0.008Ω vs. typical 0.4Ω) that even the hungriest of small to medium sized amplifiers won’t be starved for clean AC power. The results of feeding your equipment with low output impedance are dramatic: unrestrained dynamics even under the loudest passages, an open, wide soundstage that does not collapse with volume and a naturalness to the music that is remarkable.
Owners who have invested in a Stellar Power Plant 3 can rest assured that their connected equipment will be safe from any power line event such as over voltage, under voltage, surges, spikes and potentially threatening problems.
The input voltage to the Power Plant is fully protected by state-of-the-art clamping devices and the output of the Power Plant is fully regulated so even large voltage swings that would normally damage connected equipment are made safe by either clamping or regulating. In most cases, connected equipment enjoys the protection and performance benefits of fully regulated power, even under extreme circumstances.
How does it work?
The Stellar Power Plant 3 takes your incoming AC power and converts it to DC, similar to what comes out of a battery, and then with patented PS Audio technology regenerates and produces new sine-wave-perfect, regulated high current AC power. In the process of regeneration, any problems commonly found on your power line such as low voltage, distorted waveforms, sagging power, flat-topping and noise are eliminated.
Since the introduction of Power Plant regenerator technology in 1997 many reviewers, as well as many thousands of customers around the world, have experienced for themselves just how critical, essential and unique a Power Plant is. One long-time reviewer remarked that “It is the first component anyone serious about high-quality audio should get.”
It’s good to understand the importance of power in a high-end audio system. Everything we hear through our system is really the power from our home’s wall socket manipulated by our electronics to make music through our speakers. The quality of that power is critical to the success of any high-end system.
Understanding the difference between Power Plant 3 and legacy power conditioners
Traditional power conditioners have been widely available for several decades and range in price from a few dollars to multiple thousands.
Most power conditioners on the market today are passive filters. This means there are only passive parts inside such as capacitors, resistors, transformers and coils of wire. Power conditioners do not have the ability to add missing energy back onto the power line to correct for the serious issues in the AC, nor can they lower output impedance—critical to high-performance audio.
While some respected high-end power conditioners do provide better sound for many systems, they are only scratching the proverbial surface—unable to address the fundamental problems found on the AC line. They cannot rise to the level of an active regenerator ensuring your listening experience will always be the same. Quite simply put, by relying on passive conditioners to clean AC power, one relinquishes the performance, security, and reliability of an active PS Power Plant.
Power Plants are not power conditioners
Power Plants are personal AC generators that provide hard-working perfected results from the AC power line. Power regeneration uses active components like those found in large and powerful audio amplifiers to rebuild the AC power and produce clean, clear, distortion-free, regulated AC to the equipment.
Power Plants also provide excellent protection and cleaning of radio, cell phone, and computer interference, but more importantly, regeneration provides a steady, regulated, ultra-low impedance source of pure AC, unaffected by the equipment’s demands for power.
The key to the Power Plant’s success and what makes it so unique in the industry is the way it makes the power better.
Instead of simple filtering, as a legacy power conditioner does, the Power Plant repairs the main power issues caused by the equipment itself: dynamic fluctuations.
Dynamic fluctuations occur with every power amplifier or receiver on the market. When a loud musical passage is reproduced, the power amplifier draws more power from the wall to feed the loudspeakers. When this occurs, the voltage at the wall decreases in direct relationship with the loudness of the musical passage. Louder is worse.
Traditional power conditioners only worsen this already bad situation
If, on the other hand, the system is powered from a Power Plant AC regenerator, the problem is entirely eliminated. Dynamic voltage fluctuations are stopped completely and the power amp receiving perfectly regulated, steady AC power regardless of the demands from the power amplifier.
In a high-end system where perfection is hoped for and compromise is not an option that’s acceptable, the improvements brought by a Power Plant are instantly recognized with a simple audition that shows both with and without perfected power.
|Dimensions||430 × 304 × 83 mm|
|Typical Output THD||
|Efficiency @ 300VA||
45 – 65 Hz
|Peak Current Surge||
|Max Surge Voltage||
Suitable for continuous operation
|Electrical Supply Nominal Rating||
230V 10A 50/60Hz
|Maximum Continuous Load|
|Maximum Peak Load|
Only logged in customers who have purchased this product may leave a review.
At Len Wallis Audio, whether you’re purchasing in store, over the phone or online through our ecommerce store, we want you to be completely satisfied with your purchase.
Our Refund, Return and Repairs Policy is here to clarify any concerns or questions you might have prior to you making a purchase from us. This way you can be sure of our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
We also recommend you immediately inspect any goods that you receive from us to ensure you are completely satisfied with the goods, including that the goods are of acceptable quality, and match the description we have provided to you.
If you have any questions about this policy, please contact us at email@example.com or 02 9427 6755
We require a receipt or proof of purchase.
- Please do not send your purchase back to the original manufacturer.
- There are certain situations where only partial refunds are granted (if applicable). For example:
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned for reason of change of mind more than 14 days after delivery or purchase from the store.
Consumer Guarantees and Your Rights under the Australian Consumer Law
Refer to our page for more information.
Goods Damaged in Transit.
If any goods arrive damaged, please contact us as soon as possible. Len Wallis Audio will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund the price to you. Damaged goods must be returned in the condition received by you with all original packaging, accessories and/or manuals.
Refunds will be normally be processed within five (5) days.
Where Len Wallis Audio considers the goods to have breached a consumer guarantee, any shipping costs to return the goods to Len Wallis Audio will be at our cost.
Returns and Repairs.
You may visit Len Wallis Audio and a staff member will assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be repaired, or providing you with a replacement.
Goods must be returned within a reasonable time.
If any goods cannot be easily returned to us due to their size, the fault or because they have been affixed or installed in your premises, please contact us and we will arrange an inspection to assess the goods.
Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be provided with an indicative repair time, which time may vary due to reasons beyond ours or the repairer’s reasonable control, such as part availability and incorrect fault description.
You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident, or where your rights under the Australian Consumer Law or any manufacturer’s warranty do not apply. We may provide you with an indicative fee, which may vary due to reasons beyond our control.
If any goods that you return are capable of retaining user generated data such as files stored on a hard drive, and songs stored on a portable media player, the replacement or repair of the goods may result in loss of the data. In these circumstances, we recommend you back up data to prevent data loss, and remove sensitive or confidential data, as a party assessing and/or repairing your goods may be required to view data in the course of carrying out the assessment. We will not be responsible for any data loss.
In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Where you have any questions or concerns relating to your Order, please immediately contact us
We understand that sometimes you may simply change your mind about a purchase or have made a wrong selection. In these situations, you have 14 days in which to return your item for a refund, exchange or store credit. If more than 14 days has passed since your purchase we can’t offer you a refund, exchange or store credit.
To be eligible for a return, refund or store credit your item must be in the same condition that you received it. Which is to say, it must be in the original unopened packaging, and in ‘brand new’ saleable condition.
Please note that current Australian Consumer Law does not require us to offer a ‘Change of Mind’ refund. Rather Len Wallis Audio offers 14 day ‘Change of Mind Policy’ in good faith. For more information on consumer rights and guarantees, please visit the Australian Competition and Consumer Commission web site.