Planar 6 belt-drive turntable

Planar 6 belt-drive turntable

From $2,399

The Planar 6 has one goal, to reproduce your vinyl as accurately as possible.

Local pickup or $11 flat rate shipping within Australia

– Please note turntable price varies based on cartridge selection.


Welcome to Planar 6 & Neo PSU

The Planar 6 has one goal, to reproduce your vinyl as accurately as possible. Rega have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance. The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now. 

Product Details
The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.

The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.

The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.

Key Features
> NEO power supply.
> Super lightweight foam core plinth.
> Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
> Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim.
> Upgrade white drive belt fitted as standard.
> Custom dual layer smoked / clear float glass platter.
> Single piece aluminium sub platter.
> Custom machined high precision drive pulley.
> Patent pending, ultra-low friction central brass hub.
> Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
> RB330 handmade precision tonearm with custom stainless weight.
> New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
> New smoked dust cover.
> New aluminium foot trims and Planar style feet.
> Cartridge not included – mutiple options available at an additional cost

Technical Specifications 

Dimensions Turntable

Width 448mm
Depth 365mm
Height 120mm (Dustcover closed)
Weight 5.2kg

Dimensions Neo PSU

Width 180mm
Depth 155m
Height 50mm
Weight 0.6Kg

Talking Cartridges

It’s important to remember that the Planar 6 does not come with a cartridge installed and is not included in the list price. As you can imagine, good quality cartridge is key in getting the best sonic performance out of your turntable.

We can supply and install and number of different quality cartiridges to suit your music preferences and your budget. Come in to store to sample a wide array of options or Contact us to find out more.

Type: Turntable and arm with lightweight double braced plinth, dust cover & separate power supply.
Rotational Speeds: 33 1/3 RPM, 45 RPM
Tonearm Length: 9 inch single piece armtube
Drive Mechanism: short belt driven via 24V synchronous motor
Speed change: Electronic via separate PSU
Platter Type: Peripherally weighted dual layer float glass
Bearing Type: Precision brass bearing housing
Plinth Configuration: single piece foam cored with three feet
Dimensions (HxWxD): turntable 120 x 448 x 365mm (lid closed), power supply 50 x 180 x 155mm
Weight: turntable 5.2kg, power supply 0.6kg
Finish: Matte Polaris grey

Dimensions Turntable

Width 448mm
Depth 365mm
Height 120mm (Dustcover closed)
Weight 5.2kg

Dimensions Neo PSU

Width 180mm
Depth 155m
Height 50mm
Weight 0.6Kg

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

At Len Wallis Audio, whether you’re purchasing in store, over the phone or online through our ecommerce store, we want you to be completely satisfied with your purchase.

Our Refund, Return and Repairs Policy is here to clarify any concerns or questions you might have prior to you making a purchase from us. This way you can be sure of our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.

We also recommend you immediately inspect any goods that you receive from us to ensure you are completely satisfied with the goods, including that the goods are of acceptable quality, and match the description we have provided to you.

If you have any questions about this policy, please contact us at sales@lenwalluisaudio.com.au or 02 9427 6755

We require a receipt or proof of purchase.

  • Please do not send your purchase back to the original manufacturer.
  • There are certain situations where only partial refunds are granted (if applicable). For example:
    • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    • Any item that is returned for reason of change of mind more than 14 days after delivery or purchase from the store.

Consumer Guarantees and Your Rights under the Australian Consumer Law

Refer to our page for more information.

Goods Damaged in Transit.

If any goods arrive damaged, please contact us as soon as possible. Len Wallis Audio will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund the price to you. Damaged goods must be returned in the condition received by you with all original packaging, accessories and/or manuals.

Refunds

Refunds will be normally be processed within five (5) days.

Delivery Charges

Where Len Wallis Audio considers the goods to have breached a consumer guarantee, any shipping costs to return the goods to Len Wallis Audio will be at our cost.

Returns and Repairs.

You may visit Len Wallis Audio and a staff member will assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be repaired, or providing you with a replacement.

Goods must be returned within a reasonable time. 

If any goods cannot be easily returned to us due to their size, the fault or because they have been affixed or installed in your premises, please contact us and we will arrange an inspection to assess the goods.

Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be provided with an indicative repair time, which time may vary due to reasons beyond ours or the repairer’s reasonable control, such as part availability and incorrect fault description.

You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident, or where your rights under the Australian Consumer Law or any manufacturer’s warranty do not apply. We may provide you with an indicative fee, which may vary due to reasons beyond our control.

If any goods that you return are capable of retaining user generated data such as files stored on a hard drive, and songs stored on a portable media player, the replacement or repair of the goods may result in loss of the data. In these circumstances, we recommend you back up data to prevent data loss, and remove sensitive or confidential data, as a party assessing and/or repairing your goods may be required to view data in the course of carrying out the assessment. We will not be responsible for any data loss.

In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.

Contact Us

Where you have any questions or concerns relating to your Order, please immediately contact us

We understand that sometimes you may simply change your mind about a purchase or have made a wrong selection. In these situations, you have 14 days in which to return your item for a refund, exchange or store credit. If more than 14 days has passed since your purchase we can’t offer you a refund, exchange or store credit.

To be eligible for a return, refund or store credit your item must be in the same condition that you received it. Which is to say, it must be in the original unopened packaging, and in ‘brand new’ saleable condition.

Please note that current Australian Consumer Law does not require us to offer a ‘Change of Mind’ refund. Rather Len Wallis Audio offers 14 day ‘Change of Mind Policy’ in good faith. For more information on consumer rights and guarantees, please visit the Australian Competition and Consumer Commission web site.

Dismiss