Silver Bayonet Banana Plugs (Pack 4)

Sale!

Silver Bayonet Banana Plugs (Pack 4)

$199 Was $319

The ETI Bayonet Banana Plug – the best banana connector for optimising the performance of your speaker cables.

Local pickup or $11 flat rate shipping within Australia

The ETI Bayonet Banana Plug – the best banana connector for optimising the performance of your speaker cables.

Unplated fine Silver (99.99%) or Tellurium Copper only. No Brass, no Nickel. Clean, unrestrained conductivity for the purest listening experience.
Elegant geometry creates a low mass conductor for reduced capacitive & inductive reactance, while high strength polymer parts minimise EMF, EFI & RFI influences.
Low mass for reduced capacitive& inductive reactance.

A locking mechanism that is independent of the & the perfect single point of contact for transfer of an intact audio signal.

The ETI Bayonet Plug is an elegant solution providing a faster, cleaner signal of high purity and detail. First, ETI use a conductive pin of ideal thickness and mass to minimise skin effect problems. The locking mechanism is positive and secure but a separate (and dedicated) part of the design that leaves no room for sonic degradation. Other manufacturers incorporate the signal conductor into the locking system. Immediately sonic performance of competitor connectors is compromised. The conductor pin is machined from either Tellurium Copper (over 90% IACS) or pure Silver (106% IACS) to ensure maximum conductivity. This provides up to 320% greater conductivity than Gold plated brass plugs, resulting in enhanced electron flow, improved signal integrity and higher resolution. Competitor designs, even expensive ‘high-end’ ones, use a composite consisting of brass or Phosphor bronze as the main conductor (at 28% the conductivity of Copper) with Nickel and Gold over plating. These metals can be unacceptably detrimental. The ETI Bayonet Plug, like the ETI BulletPlug utilises Gold flashed Tellurium Copper or pure Silver for optimum conductivity.

Eichmann bayonet banana plugs – silver.
Eichmann bayonet banana plugs – silver.

Specifications:

Conductors: Bayonet Plug: Gold-flashed Tellurium Copper or Pure 4N Silver.
Construction: Bayonet Plug: High strength, temperature resistant, electrically inert polymer over-moulds and injection moulded parts.
Housings: Bayonet Plug – ABS polymer (ID 7.75mm, total length 52mm).
The Bayonet Plug is made to the standard 4mm banana connector specifications and is able to be crimped and / or soldered to wire connections.
The recommended crimping tool is: PAL 1618 – Paladin 1618 Professional Quality Crimp Tool for 20-10 AWG Non-Insulated Standard Commercial Terminals and Lugs.
Fully compatible with all binding posts.
Each pack contains 4 banana plugs (2 black / 2 red).

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

At Len Wallis Audio, whether you’re purchasing in store, over the phone or online through our ecommerce store, we want you to be completely satisfied with your purchase.

Our Refund, Return and Repairs Policy is here to clarify any concerns or questions you might have prior to you making a purchase from us. This way you can be sure of our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.

We also recommend you immediately inspect any goods that you receive from us to ensure you are completely satisfied with the goods, including that the goods are of acceptable quality, and match the description we have provided to you.

If you have any questions about this policy, please contact us at sales@lenwalluisaudio.com.au or 02 9427 6755

We require a receipt or proof of purchase.

  • Please do not send your purchase back to the original manufacturer.
  • There are certain situations where only partial refunds are granted (if applicable). For example:
    • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    • Any item that is returned for reason of change of mind more than 14 days after delivery or purchase from the store.

Consumer Guarantees and Your Rights under the Australian Consumer Law

Refer to our page for more information.

Goods Damaged in Transit.

If any goods arrive damaged, please contact us as soon as possible. Len Wallis Audio will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund the price to you. Damaged goods must be returned in the condition received by you with all original packaging, accessories and/or manuals.

Refunds

Refunds will be normally be processed within five (5) days.

Delivery Charges

Where Len Wallis Audio considers the goods to have breached a consumer guarantee, any shipping costs to return the goods to Len Wallis Audio will be at our cost.

Returns and Repairs.

You may visit Len Wallis Audio and a staff member will assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be repaired, or providing you with a replacement.

Goods must be returned within a reasonable time. 

If any goods cannot be easily returned to us due to their size, the fault or because they have been affixed or installed in your premises, please contact us and we will arrange an inspection to assess the goods.

Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be provided with an indicative repair time, which time may vary due to reasons beyond ours or the repairer’s reasonable control, such as part availability and incorrect fault description.

You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident, or where your rights under the Australian Consumer Law or any manufacturer’s warranty do not apply. We may provide you with an indicative fee, which may vary due to reasons beyond our control.

If any goods that you return are capable of retaining user generated data such as files stored on a hard drive, and songs stored on a portable media player, the replacement or repair of the goods may result in loss of the data. In these circumstances, we recommend you back up data to prevent data loss, and remove sensitive or confidential data, as a party assessing and/or repairing your goods may be required to view data in the course of carrying out the assessment. We will not be responsible for any data loss.

In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.

Contact Us

Where you have any questions or concerns relating to your Order, please immediately contact us

We understand that sometimes you may simply change your mind about a purchase or have made a wrong selection. In these situations, you have 14 days in which to return your item for a refund, exchange or store credit. If more than 14 days has passed since your purchase we can’t offer you a refund, exchange or store credit.

To be eligible for a return, refund or store credit your item must be in the same condition that you received it. Which is to say, it must be in the original unopened packaging, and in ‘brand new’ saleable condition.

Please note that current Australian Consumer Law does not require us to offer a ‘Change of Mind’ refund. Rather Len Wallis Audio offers 14 day ‘Change of Mind Policy’ in good faith. For more information on consumer rights and guarantees, please visit the Australian Competition and Consumer Commission web site.

Dismiss